Piqua, Ohio – Formerly Retterbush Fiberglass

Arrowhead’s Piqua, Ohio facility is a 28,800-square-foot custom fiberglass and FRP manufacturing plant serving OEMs and industrial customers throughout the United States. Formerly Retterbush Fiberglass, the facility offers open molding, closed molding, vacuum infusion, and compression molding for custom fiberglass and composite parts.

Our Piqua team supports customers from early product development and process selection through tooling, prototyping, production, trimming, and assembly. If you have a part design but have not selected a molding process or developed tooling, Arrowhead can help identify the process that fits your part geometry, performance requirements, production volume, finish, and budget.

Retterbush Fiberglass in Piqua, OH

Piqua Fiberglass Manufacturing Facility

The Piqua facility combines multiple fiberglass and composite molding processes under one roof. Our team can manufacture parts using existing customer specifications and tooling or help develop the molds, fixtures, patterns, and production process required for a new component.

Located in western Ohio, the facility serves customers throughout the Midwest and ships custom fiberglass and FRP parts nationwide.

719 Long Drive
Piqua, OH 45356

  • Sheet Molding Compound (SMC)

  • RTM Lite

  • Vacuum Infusion Bag Molding (VIBM)

  • Spray-Up and Hand Lay-Up Open Molding

Piqua, Ohio Fiberglass Molding and FRP Molding Capabilies

Having several molding processes available allows our team to evaluate a project and help customers select the right manufacturing method when production tooling has not yet been developed.

Custom Hand Lay-Up Open Molding
Hand lay-up provides flexibility for custom fiberglass components, particularly large parts, complex shapes, and lower-volume production. Fiberglass reinforcement and resin are applied within an open mold to build the required part structure and thickness.

Custom Spray-Up Open Molding
Spray-up molding uses resin and chopped fiberglass reinforcement applied within an open mold. The process provides an efficient option for producing many large and custom fiberglass components.

Custom Resin Transfer Molding (RTM)
Resin Transfer Molding is a closed molding process in which resin is introduced into a mold containing fiberglass reinforcement. RTM provides control over part dimensions, resin distribution, surface quality, and production repeatability.

Custom RTM Lite Closed Molding
RTM Lite provides many advantages of closed molding while using lower-cost tooling than traditional RTM for appropriate applications. It can be an effective option for repeatable fiberglass parts with controlled material usage and quality finished surfaces.

Custom Silicone Bag Closed Molding / Vacuum Infusion
Silicone bag molding uses vacuum to draw resin through fiberglass reinforcement within the mold. This closed molding process provides controlled resin distribution and consistent laminate construction for composite components.

Custom Compression Molding
The Piqua facility offers low-tonnage, low-volume compression molding for appropriate fiberglass and composite components. The process can provide consistent part dimensions and repeatability for parts suited to matched-mold production.

From Product Development to Production

Arrowhead can support customers throughout the development of a new fiberglass or composite component, helping turn an initial concept or existing part into a repeatable manufacturing process.

Capabilities include:

  • CAD models and 2-D drawings
  • CNC-cut patterns
  • Prototype parts
  • Production molds and trim fixtures
  • Tooling modifications
  • CNC trimming
  • Bonding and fabrication
  • Post-molding assembly
  • Reverse engineering
  • Laser scanning and precision measurement

This support helps customers coordinate product design, tooling, molding, and secondary operations with a single manufacturing partner.

Plastic Thermoformed Parts

Could Thermoformed Plastic Be a Better Fit?

Because Arrowhead manufactures both fiberglass composites and thermoformed plastic components, we can also evaluate whether an existing fiberglass part could be converted to thermoformed plastic.

Depending on part size, geometry, strength requirements, production volume, and application, thermoforming may offer opportunities to reduce weight, simplify finishing, shorten production time, or lower manufacturing costs. Arrowhead has helped customers make this transition when thermoformed plastic provides a better fit for the application.

Custom FRP Manufacturing for Industrial Applications

The Piqua facility supports custom FRP fabrication and fiberglass molding for industrial equipment, transportation, agriculture, construction, recreation, utilities, material handling, commercial products, and specialty equipment.

Whether you need an industrial fiberglass parts manufacturer for an existing production program or help developing a new component, Arrowhead can assist with process selection, product development, tooling, molding, finishing, and assembly.

Fiberglass Engine Cover

Discuss Your Custom Fiberglass Project

Have an existing fiberglass part, a new product design, or a component that may be a candidate for thermoformed plastic? Contact Arrowhead to discuss your requirements and determine an appropriate manufacturing approach for your project.